Namimera Tension-Mount Floor-to-Ceiling Support Pole with Rotating Curved Grab Bar, White
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This property-team-ready product summary covers a tension-mounted floor-to-ceiling support pole for flat ceilings 7 ft. to 10 ft., with a manufacturer-stated 300 lb capacity, 1.5 in. steel pole, and pivoting curved grab bar, helping accessibility programs move from review to release with fewer scope gaps.
Highlights
- Tension mount installs between a flat floor and flat ceiling with no drilling required
- Manufacturer-stated 300 lb maximum user weight capacity
- Curved ladder-grip bar rotates 360 degrees and locks every 45 degrees
- Grab bar positions between 32 in. and 52 in. from the floor
- Fits flat ceiling heights from 7 ft. to 10 ft. with included extension
- 1.5 in. diameter zinc-plated steel pole with powder-coat finish
- Optional hard-mount hardware included for permanent installations
- Not for use inside tubs or showers or on angled, suspended, or vaulted ceilings
Specification Table
| Configuration | Floor-to-ceiling tension pole with pivoting curved grab bar |
| Ceiling height range | 7 ft. to 10 ft., flat ceilings only |
| Maximum user weight | 300 lb, manufacturer stated |
| Grab bar height | 32 in. to 52 in. from floor |
| Grab bar locking | Rotates 360 degrees, locks every 45 degrees |
| Pole diameter | 1.5 in. |
| Top beam | 22 in. L x 10 in. W |
| Material | Zinc-plated steel, powder-coated |
| Finish | White |
| Product weight | 20 lb |
| Warranty | Limited lifetime warranty |
Included Equipment
- Two-piece main pole with adjustable extension tube for 8, 9, and 10 ft. ceilings
- Pivoting curved ladder-grip grab bar
- Padded top beam and floor base
- Tensioning wrench
- Optional floor and ceiling hard-mount hardware
- Assembly and safety instructions
Installation Notes
- Install only between a flat floor and a flat ceiling 7 ft. to 10 ft. high; angled, paneled, suspended, and vaulted ceilings are not compatible.
- Do not install inside a bathtub or shower or over a loose rug.
- Tighten the adjustment nut with the included wrench until the pole is fully secured, and verify there is no sliding before first use.
- This support is intended for balance assistance while sitting and standing, not to carry the full weight of the user.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty
- Replacement tension hardware and grab bar components are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Does it require drilling into the floor or ceiling?
No. The pole installs with tension using the included wrench. Hard-mount hardware is included for optional permanent anchoring.
What ceiling heights does it fit?
Flat ceilings from 7 ft. to 10 ft. The included extension tube has indexed holes for 8, 9, and 10 ft. heights.
Can it be used in a shower?
No. The manufacturer-stated usage excludes bathtubs, showers, and sloped or suspended ceilings. Wall-mounted grab bars are the right product for wet areas and can be quoted separately.
How much weight does it support?
The published specification summary lists a 300 lb maximum user weight for balance support while sitting and standing.
Documents
- Type Floor-to-Ceiling Support Pole
- SKU NM-PLB-HW-GB-TENS-WH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.