Namimera Touchless Single-Handle Pull-Down Kitchen Faucet, 1.5 GPM, Matte Black
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a wave-activated single-handle pull-down faucet with 1.5 GPM flow at 60 psi, a 14.58 in. spout height with 7.5 in. reach, a two-function wand on a 68 in. braided hose, and a ceramic disc cartridge, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Hands-free wave sensor starts and stops water without touching the handle
- 1.5 GPM flow at 60 psi meets common state efficiency codes
- Two-function wand: aerated stream and high-power rinse
- 14.58 in. high-arc spout with 180 degree swivel
- 68 in. braided hose with spring-return docking
- Quick-connect installation with deck plate included
- Matte black, chrome, or stainless finish
- ADA compliant lever; certified to NSF/ANSI 61 and 372
Specification Table
| Flow rate | 1.5 GPM at 60 psi |
| Activation | Wave sensor plus manual lever; six AA batteries included |
| Valve cartridge | Ceramic disc |
| Spray modes | Aerated stream and high-power rinse |
| Spout height | 14.58 in. |
| Spout reach | 7.5 in. from base center |
| Spout swivel | 180 degrees |
| Hose | 68 in. braided pull-down hose |
| Mounting | 1 or 3 holes, 1.5 in. min diameter, deck plate included |
| Body material | Metal construction |
| Supply connections | 3/8 in. compression |
| Warranty | Limited lifetime trim; 5-year electronics |
Included Equipment
- Pull-down faucet body with two-function spray wand
- 68 in. braided pull-down hose with control box and data cable
- Battery holder with six AA batteries
- Deck plate for 3-hole installations
- Mounting hardware
- Installation guide
Installation Notes
- Confirm 1 or 3-hole layout, 1.5 in. minimum hole diameter, and deck thickness up to 2.5 in. before cutting.
- The handle mounts on the right side only; verify clearance to backsplash and window trim.
- Mount the control box and battery pack inside the cabinet and route the data cable clear of the hose travel.
- Flush supply lines before first use to protect the ceramic cartridge from debris.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on trim and finish with 5-year coverage on electronic operation for the original consumer
- Replacement wands, hoses, sensors, and cartridges are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Does the faucet work during a power or battery outage?
Yes. The lever handle operates the faucet manually at all times; the sensor simply stops responding until batteries are replaced.
What finishes are available?
Matte black, chrome, and stainless. The finish for the final order is confirmed during quote review.
How does this differ from the taller Namimera touchless model?
This body runs a 14.58 in. spout with a two-function wand, while the taller model runs 15.86 in. with a three-function wand and soap dispenser. Fit is otherwise similar; both are confirmed during quote review.
Is the flow rate code-compliant?
The published specification summary lists 1.5 GPM at 60 psi. Local code requirements should be confirmed during quote review.
Documents
- Type Touchless Kitchen Faucet
- SKU NM-PLB-KF-PDW15-MB-MB
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.