Namimera Touchless Pull-Down Kitchen Faucet with Soap Dispenser, 1.5 GPM, Stainless
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a wave-activated single-handle pull-down faucet with 1.5 GPM flow at 60 psi, a 15.86 in. high-arc spout with 7.84 in. reach, a three-function wand with pause, a 68 in. hose, and a matching soap dispenser, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Hands-free wave sensor starts and stops water without touching the handle
- 1.5 GPM flow at 60 psi meets common state efficiency codes
- Three-function wand: aerated stream, high-power rinse, and pause
- High-arc 15.86 in. spout with 360 degree swivel clears stock pots
- 68 in. braided hose with spring-return docking
- Matching soap dispenser included in the carton
- Stainless, matte black, or dark bronze finish
- ADA compliant lever; certified to NSF/ANSI 61 and 372
Specification Table
| Flow rate | 1.5 GPM at 60 psi |
| Activation | Wave sensor plus manual lever; six AA batteries included |
| Valve cartridge | Ceramic disc |
| Spray modes | Aerated stream, high-power rinse, pause |
| Spout height | 15.86 in. |
| Spout reach | 7.84 in. from base center |
| Spout swivel | 360 degrees |
| Hose | 68 in. braided pull-down hose |
| Mounting | 1 to 4 holes, 1.5 in. min diameter, deck plate included |
| Body material | Metal construction |
| Supply connections | 3/8 in. compression |
| Warranty | Limited lifetime trim; 5-year electronics |
Included Equipment
- Pull-down faucet body with three-function spray wand
- 68 in. braided pull-down hose with control box and data cable
- Battery holder with six AA batteries
- Matching liquid soap dispenser
- Deck plate for 3-hole installations
- Mounting hardware and installation guide
Installation Notes
- Confirm mounting-hole count, 1.5 in. minimum hole diameter, and deck thickness up to 2.5 in. before cutting.
- The handle installs on the right side only; verify clearance to backsplash and window trim.
- Mount the control box and battery pack inside the cabinet, then route the data cable away from the hose travel path.
- Flush supply lines before first use to protect the ceramic cartridge from debris.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on trim and finish with 5-year coverage on electronic operation for the original consumer
- Replacement wands, hoses, sensors, and cartridges are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Does the faucet still work if the batteries die?
Yes. The lever handle operates the faucet manually. The sensor runs on six AA batteries with roughly one year of typical life, and an AC adapter is available separately.
What finishes are available?
Stainless, matte black, and dark bronze. The finish for the final order is confirmed during quote review.
Does it fit a 4-hole sink?
Yes. The faucet installs through 1 to 4 holes with the included deck plate, and the soap dispenser can occupy a fourth hole.
Is the flow rate code-compliant?
The published specification summary lists 1.5 GPM at 60 psi. Local code requirements should be confirmed during quote review.
Documents
- Type Touchless Kitchen Faucet
- SKU NM-PLB-KF-PDT15-SS-SS
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.