Prezio Stone Matilda 63 in. W Carved Stone Fireplace Mantel in Statuario White Marble
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
Matilda is a wide bolection surround in Statuario White Marble, photographed in a clean, near uniform white. The generous ogee roll gives the piece softness while the overall line stays strictly rectangular.
Nominal 1600 mm wide by 1200 mm tall at a 100 mm projection, so it carries width without crowding the room. The fire grate in the photograph is styling, not part of the supply.
Highlights
- Wide bolection surround in Statuario White Marble
- Nominal 1600 mm (63 in) width
- Custom dimensions are standard in this trade, confirmed at quote review
- Carved surround frame as photographed: two legs and head sections
- Crated for freight with pre dispatch photography for approval
- Quote first program with submittal documentation
Specification Table
| Stone | Statuario White Marble |
| Design | Wide bolection surround |
| Nominal size | 1600 x 1200 x 100 mm (63 x 47 x 4 in), W x H x D |
| Weight class | approx 156 kg (343 lb), estimated for freight planning; confirmed at quote review |
| Components | Two legs and head frame sections |
| Fuel note | Decorative surround; appliance and clearance requirements are confirmed at quote review |
| Care | Dust with a soft cloth; pH neutral cleaners only |
Included with This Program
- Carved surround frame as photographed: two legs and head sections
- Protective crating for freight
- Product submittal documentation
Installation and Care Notes
- Stone surrounds are heavy assemblies; confirm that the floor and wall structure can carry the installed weight before the piece ships.
- Each component is mechanically anchored to masonry or framing per the installation detail issued with the order.
- Maintain non combustible clearances to the firebox per the appliance listing and local code; the surround is decorative and does not change appliance clearance requirements.
- Installation by an experienced stone or masonry professional is required; components are dry fitted, shimmed level, and set with color matched adhesive at the joints.
- Keep edge protection on until the piece is set; stone corners chip under point loads.
Program Support
- Each surround is inspected and photographed before crating, and the photography is shared for approval prior to dispatch.
- Quote first program: dimensions, stone selection, and site details are confirmed in writing before production.
- Support continues through delivery scheduling and installation questions with your installer of record.
Frequently Asked Questions
Can the mantel be sized to my fireplace opening?
Yes. The cataloged size is nominal 1600 x 1200 mm and custom dimensions are standard in this trade. Share the opening size, appliance details, and wall elevation at quote and the surround is produced to your specification.
Can the design be carved in a different stone?
Usually yes. The photographed stone is the reference for this listing, and alternate species or colorways can be quoted on request with material photography for approval.
Does it work with gas or wood burning appliances?
The surround itself is a decorative stone assembly. Appliance make and model, hearth requirements, and clearances to combustibles are confirmed against the appliance listing and local code during quote review.
What exactly is included?
The carved surround components shown in the photography, crated for freight. Inserts, grates, hearth slabs, and styling props are not included.
Documents
- Type Stone Fireplace Mantel
- SKU PS-STN-FPL-MATILDA
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.