Prezio Stone Stonebrook Fieldstone Panel, Cement Backed
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
Stonebrook bonds random fieldstone faces to a mesh reinforced cement backer, a modular 60 x 20 cm panel that lays the hand built rubble look in fast, repeatable courses. Eight colorways run from rusty Copper Field to pale Cream Hollow and grey green Willow Fen. For fully freeform mortared walls we also offer a loose fieldstone veneer program; Stonebrook is the panelized system, built for coursing speed and a consistent bond plane.
The cement backing gives every panel a flat, keyed bonding face reinforced with embedded mesh, so the format sets reliably in standard veneer mortar with far less sorting than laying loose stone. Faces are split random fieldstone with up to the stated 5 cm of relief, deeper than ledger formats, and the irregular interlocking panel edges stagger the joints so the finished wall reads as hand laid masonry rather than a repeating module.
Highlights
- Random fieldstone faces pre bonded to a mesh reinforced cement backer
- Modular 60 x 20 cm panel, approx 1.29 sq ft per piece
- 8 colorways from rusty Copper Field to pale Cream Hollow
- Panelized alternative to loose fieldstone veneer for faster coursing
- Quote first program with colorway sample approval before production
Specification Table
| Material | Natural fieldstone, quartzite character, split faces on cement backer |
| Format | Mesh backed cement fieldstone panel, approx 60 x 20 cm (23.6 x 7.9 in) |
| Thickness | Up to approx 5 cm relief (printed); average section approx 30 mm |
| Coverage | Approx 0.12 sq m = 1.29 sq ft per panel; order plus 10 percent waste |
| Corners | Matching corner units quoted by linear foot |
| Colorways | 8: Copper Field, Charcoal Moor, Golden Heath, Bracken Ridge, Cream Hollow, Barley Dale, Russet Vale, Willow Fen |
| Application | Interior and exterior walls; vertical surfaces only |
| Care | Breathable penetrating sealer optional; pH neutral cleaners |
Included with This Program
- Mesh backed cement fieldstone panels per approved coverage
- Matching corner units by linear foot when specified at quote review
- Colorway sample approval before production
- Care and installation reference documents
Installation and Care Notes
- Install over a code approved substrate. Exterior walls need a weather resistive barrier, metal lath, and a cured scratch coat; clean interior masonry or cement board can take direct adhesion.
- Set panels in a polymer modified veneer mortar (ANSI A118.4 or A118.15 class); the mesh backed cement face takes full bed coverage without back buttering individual stones.
- Start at the base and work upward, staggering vertical joints so the irregular panel edges interlock and the module disappears into the coursing.
- Dry lay panels from several crates first and blend colorway variation across the wall; natural fieldstone varies piece to piece.
- Order 10 percent extra coverage for cuts and waste. Matching corner units are quoted by the linear foot during quote review.
- Where the wall sees regular water exposure, finish with a breathable penetrating sealer. Carry substrate movement joints through the stone.
Program Support
- Quote first program: quantities, colorway, and production timing are confirmed in writing before any order is placed.
- Colorway samples or current production lot photos are approved before the order ships, so the delivered stone matches the approved reference.
- Support covers submittal documents, coverage math, and installation reference material through the quote team.
Frequently Asked Questions
How is this different from loose fieldstone veneer?
Our loose fieldstone veneer program supplies graded individual stones for hand laying in a full mortar bed, the traditional way to build a freeform rubble wall. Stonebrook bonds the same class of random fieldstone faces to mesh backed cement panels in a 60 x 20 cm module, so the coursing goes up faster with a consistent bond plane and less on wall sorting. Choose loose veneer for fully organic joints and one off shapes; choose the panel system for schedule and repeatability.
Are matching corner units available?
Yes. Pre-formed 90 degree corner units matching this line are quoted by the linear foot during quote review, following standard stone veneer corner conventions.
How do I estimate the quantity I need?
Each 60 x 20 cm panel covers approx 0.12 sq m, about 1.29 sq ft. Measure the wall area, subtract openings, and add 10 percent for cuts and waste. The quote team checks the math on every request.
Will the delivered stone match the photos?
Natural fieldstone varies within a colorway; that variation is the point of the material. Your quote includes colorway sample or lot photo approval before production so you see the current range first.
Documents
- Type Stone Veneer Panel
- SKU PS-STN-CLT-FLDPANEL-C1
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.