Prezio Stone Stonegate Castle Stone Panel, Cement Backed
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
Stonegate bonds squared castle stone faces to a mesh cement backing, bringing the weight and order of ashlar masonry to a 60 x 20 cm panel that installs like veneer. Nine colorways run from Chalk Quarry cream to near black Midnight Ridge.
Each panel carries split faced blocks in mixed coursed sizes, so staggered joints read as a hand laid castle wall rather than a repeating module. The mesh cement backing gives every panel a flat, keyed bonding face that sets reliably in standard veneer mortar, while the blocks stand in up to approx 5 cm of natural relief.
Highlights
- Squared castle stone faces bonded to a mesh cement backing
- Generous 60 x 20 cm panel, approx 1.29 sq ft per piece
- 9 colorways from Chalk Quarry cream to Midnight Ridge near black
- Coursed ashlar character with up to approx 5 cm natural relief
- Quote first program with colorway sample approval before production
Specification Table
| Material | Natural stone, quartzite character, squared split face blocks on a mesh cement backing |
| Format | Cement backed castle stone panel, approx 60 x 20 cm (23.6 x 7.9 in) |
| Thickness | Up to approx 5 cm relief (printed maximum); average section approx 30 mm |
| Coverage | Approx 1.29 sq ft per panel (0.12 sq m); order plus 10 percent waste |
| Corners | Matching corner units quoted by linear foot |
| Colorways | 9: Harbor Grey, Bluestone Mix, Chalk Quarry, Driftwood Tan, Sage Castle, Timber Grey, Slate Harbor, Copper Glen, Midnight Ridge |
| Application | Interior and exterior walls; vertical surfaces only |
| Care | Breathable penetrating sealer optional; pH neutral cleaners |
Included with This Program
- Cement backed castle stone panels per approved coverage
- Matching corner units by linear foot when specified at quote review
- Colorway sample approval before production
- Care and installation reference documents
Installation and Care Notes
- Install over a code approved substrate. Exterior walls need a weather resistive barrier, metal lath, and a cured scratch coat; clean interior masonry or cement board can take direct adhesion.
- Set panels in a polymer modified veneer mortar (ANSI A118.4 or A118.15 class); the flat cement back takes full bed coverage without back buttering each block.
- Start at the base and work upward, staggering vertical joints so the squared blocks read as continuous coursed masonry; panels butt tight with no grout joint.
- Order 10 percent extra coverage for cuts and waste. Matching corner units are quoted by the linear foot during quote review.
- Where the wall sees regular water exposure, finish with a breathable penetrating sealer. Carry substrate movement joints through the stone.
Program Support
- Quote first program: quantities, colorway, and production timing are confirmed in writing before any order is placed.
- Colorway samples or current production lot photos are approved before the order ships, so the delivered stone matches the approved reference.
- Support covers submittal documents, coverage math, and installation reference material through the quote team.
Frequently Asked Questions
Are matching corner units available?
Yes. Pre-formed 90 degree corner units matching this line are quoted by the linear foot during quote review, following standard stone veneer corner conventions.
How do I estimate the quantity I need?
Each 60 x 20 cm panel covers approx 1.29 sq ft. Measure the wall area, subtract openings, and add 10 percent for cuts and waste. The quote team checks the math on every request.
Can it be used outdoors and around fireplaces?
Yes. Split face stone veneer suits interior and exterior walls, including fireplace surrounds and chimney chases. Keep required clearances to combustion per the appliance listing, and use exterior grade installation over a lath and scratch coat outdoors.
Will the delivered stone match the photos?
Natural stone varies within a colorway; that variation is the point of the material. Your quote includes colorway sample or lot photo approval before production so you see the current range first.
Documents
- Type Stone Veneer Panel
- SKU PS-STN-CLT-CASTLEPNL-C1
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.