Prezio Stone Tidewater Ledger Stone Panel, Cement Backed
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
Tidewater bonds split face stone strips to a flat cement backer, a compact 40 x 10 cm ledger unit that handles like a tile and lays up fast. Eight cool colorways run from Chalk White to near black Graphite.
The cement backing gives every panel a flat, keyed bonding face, so the format sets reliably in standard veneer mortar with less sorting and shimming than loose stone. The 4 cm maximum relief keeps courses tight while the split faces carry full natural texture.
Highlights
- Split face stone strips pre bonded to a flat cement backer
- Compact 40 x 10 cm panel, approx 0.43 sq ft per piece
- 8 cool colorways from Chalk White to Graphite
- Flat keyed back sets fast and flush in standard veneer mortar
- Quote first program with colorway sample approval before production
Specification Table
| Material | Natural split face stone on cement backer |
| Format | Cement backed ledger panel, approx 40 x 10 cm (15.7 x 3.9 in) |
| Thickness | Up to approx 4 cm relief (printed); average section approx 25 mm |
| Coverage | Approx 0.43 sq ft per panel (approx 2.3 panels per sq ft); order plus 10 percent waste |
| Corners | Matching corner units quoted by linear foot |
| Colorways | 8: Juniper Grey, Sea Glass, Coal Harbor, Blue Fjord, Morning Fog, Chalk White, Graphite, Pewter Two Tone |
| Application | Interior and exterior walls, fireplace surrounds; vertical surfaces only |
| Care | Breathable penetrating sealer optional; pH neutral cleaners |
Included with This Program
- Cement backed ledger panels per approved coverage
- Matching corner units by linear foot when specified at quote review
- Colorway sample approval before production
- Care and installation reference documents
Installation and Care Notes
- Install over a code approved substrate. Exterior walls need a weather resistive barrier, metal lath, and a cured scratch coat; clean interior masonry or cement board can take direct adhesion.
- Set panels in a polymer modified veneer mortar (ANSI A118.4 or A118.15 class); the flat cement back takes full bed coverage without back buttering each strip.
- Start at the base and work upward, staggering vertical joints; panels butt tight with no grout joint.
- Order 10 percent extra coverage for cuts and waste. Matching corner units are quoted by the linear foot during quote review.
- Where the wall sees regular water exposure, finish with a breathable penetrating sealer. Carry substrate movement joints through the stone.
Program Support
- Quote first program: quantities, colorway, and production timing are confirmed in writing before any order is placed.
- Colorway samples or current production lot photos are approved before the order ships, so the delivered stone matches the approved reference.
- Support covers submittal documents, coverage math, and installation reference material through the quote team.
Frequently Asked Questions
Are matching corner units available?
Yes. Pre-formed 90 degree corner units matching this line are quoted by the linear foot during quote review, following standard ledger corner conventions.
How do I estimate the quantity I need?
Each 40 x 10 cm panel covers approx 0.43 sq ft, approx 2.3 panels per sq ft. Measure the wall area, subtract openings, and add 10 percent for cuts and waste. The quote team checks the math on every request.
Can it be used outdoors and around fireplaces?
Yes. Split face stone veneer suits interior and exterior walls, including fireplace surrounds and chimney chases. Keep required clearances to combustion per the appliance listing, and use exterior grade installation over a lath and scratch coat outdoors.
Will the delivered stone match the photos?
Natural stone varies within a colorway; that variation is the point of the material. Your quote includes colorway sample or lot photo approval before production so you see the current range first.
Documents
- Type Stone Veneer Panel
- SKU PS-STN-CLT-LEDGERCBC-C1
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.