Vanguard Shade 1 in. Double Curtain Rod Set, Adjustable, Stock Lengths
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This specifier-ready product summary covers a complete double rod set in three stock adjustment ranges and three finishes, with front rod finials, double wall brackets, and fasteners in the box. Pick the range that brackets your measured width, add the set to your quote list, and note the opening schedule and mount surface in the quote note; the final configuration is confirmed during quote review before release.
Highlights
- Layers drapery over sheers on a single set of double brackets
- 1 in. powder coated steel front rod resists bowing on wide spans
- 3/4 in. rear rod carries the sheer or liner panel
- Three telescoping ranges cover windows from 28 in. to 120 in.
- Matching front rod finials and double brackets included
- Center support bracket included on the two longer ranges
- Pairs with Vanguard Shade grommet, pleated, and sheer panels
Specification Table
| Front rod diameter | 1 in. |
| Rear rod diameter | 3/4 in. |
| Material | Powder coated steel |
| Adjustment ranges | 28 to 48 in., 48 to 84 in., 66 to 120 in. |
| Bracket projection | Front about 6 in., rear about 3.5 in. from the wall |
| Finials | Matching pair included on the front rod |
| Mount | Wall mount, hardware included |
| Warranty | Limited manufacturer warranty with registration |
| Unit weight (nominal) | Approximately 7.5 lb per unit as packaged |
Included Equipment
- Telescoping 1 in. steel front rod
- Telescoping 3/4 in. steel rear rod
- Two matching front rod finials
- Double wall brackets with screws and anchors
- Center support bracket on 48 to 84 in. and 66 to 120 in. ranges
- Installation guide
Installation Notes
- Measure the span between bracket positions before quote submission and pick the range that places your width mid-adjustment.
- Extend the rods at least 3 in. past the window frame on each side so stacked panels clear the glass.
- Hang the sheer on the rear rod first, then the decorative panel on the front rod.
- Use the center support on spans over 60 in. and anchor into studs where possible; the included anchors handle drywall placements.
- Review the final range, finish, and bracket count during quote review before order release.
Warranty and Support
- Published warranty coverage: limited manufacturer warranty with registration
- Replacement brackets, finials, and fasteners are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Which length range should I order?
Measure the full span you want covered, including overlap past the frame, and pick the range where that number falls comfortably inside the adjustment, not at its very end.
Does it work with grommet panels?
Yes. The 1 in. front rod runs smoothly through grommets with about a 1.5 in. inner diameter, including the Vanguard Shade blackout grommet panel, and the 3/4 in. rear rod suits rod pocket and grommet sheers.
Is a center support included?
The 48 to 84 in. and 66 to 120 in. sets include a double center support bracket. The shortest range does not need one.
Documents
- Type Drapery Hardware
- SKU VS-WCV-ROD-DBL-L1BK
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.