Vanguard Shade 1 in. Wrought Iron Drapery Rod, Custom Length
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This specifier-ready product summary covers a custom-cut solid wrought iron rod with forged finials, iron brackets, and mounting fasteners. To order, add this product to your quote list and include the window or opening schedule in the quote note with dimensions to the nearest 1/8 in. and the mount surface for each opening. Final configuration is confirmed during quote review before release.
Highlights
- Solid wrought iron carries heavy lined and pleated panels without bowing
- Cut to order from 24 in. to 120 in.
- Hand-applied finishes in three curated tones
- Forged finial pair and iron wall brackets included
- Works with rings, grommets, and rod pocket headers
- Pairs with Vanguard Shade drapery panels for a complete opening
Specification Table
| Rod diameter | 1 in. |
| Material | Solid wrought iron |
| Custom length | Cut to order, 24 in. to 120 in. |
| Bracket projection | About 3.75 in. from the wall |
| Finials | Forged pair included |
| Mount | Wall mount, hardware included |
| Warranty | Limited manufacturer warranty with registration |
| Unit weight (nominal) | Approximately 7.9 lb at the reference size; final weight scales with the quoted cut size |
Included Equipment
- Solid wrought iron rod cut to the quoted length
- Two forged finials
- Iron wall brackets with screws and anchors
- Installation guide
Installation Notes
- Measure the finished rod length, including overlap past the frame, to the nearest 1/8 in. before quote submission.
- Iron rods are heavy; anchor brackets into studs or use fasteners rated for the wall material.
- Plan a center support on spans over 60 in.; it is confirmed during quote review.
- Review the final cut length, finish, and bracket count during quote review before order release.
Warranty and Support
- Published warranty coverage: limited manufacturer warranty with registration
- Replacement brackets, finials, and fasteners are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
How do I order a custom length?
Add the rod to your quote list and include the finished rod length and mount surface in the quote note. The rod is cut and confirmed during quote review before release.
How much weight can it carry?
Solid iron at 1 in. diameter comfortably carries heavy lined draperies across typical spans when brackets are anchored per the installation notes.
Do the finials add width?
Yes, forged finials add roughly 2 to 3 in. per end beyond the quoted rod length. Keep that clearance in mind on tight walls.
Documents
- Type Drapery Hardware
- SKU VS-WCV-ROD-10-WI-BK
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.