Vanguard Shade 2.5 in. Premium Cordless Faux Wood Blind, Custom Cut Width
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This specifier-ready summary covers a 2 1/2 in. faux wood horizontal blind with cordless lift, wand tilt, an impact-resistant headrail, an engineered bottom rail, and a slat design that hides route holes for tighter closure. Each blind is cut to the quoted width and length. Add the product to the quote list and include the window schedule in the quote note, with opening sizes measured to the nearest 1/8 in. and the mount type identified for each opening, and each unit is cut and confirmed during quote review before release.
Highlights
- Wide 2 1/2 in. PVC composite slats for a larger view when tilted open
- Slat-to-slat closure hides route holes for enhanced privacy and light control
- Cordless design removes accessible operating cords
- Cut-to-width program from 20 in. to 96 in., cut to 1/8 in.
- Impact-resistant headrail with engineered bottom rail
- Standard and premium slat finish tiers across whites, neutrals, and wood stains
- Inside or outside mount with hardware included
- Moisture-resistant slats suited to kitchens, baths, and garages
Specification Table
| Slat size | 2 1/2 in. |
| Material | PVC composite |
| Lift system | Cordless lift |
| Tilt control | Wand tilt |
| Cut width range | 20 in. to 96 in., cut to 1/8 in. |
| Length range | 24 in. to 96 in. |
| Maximum panel size | 48 square feet |
| Inside mount deduction | Approximately 3/8 in. total, applied at cut |
| Minimum inside mount depth | 1 5/8 in. |
| Fully recessed depth | 2 7/8 in. without valance, 3 7/8 in. with valance |
| Minimum outside mounting surface | 2 in. per side |
| Light control | Room darkening when closed |
| Warranty | Limited lifetime warranty with online registration |
| Unit weight (nominal) | Approximately 15.0 lb at the reference size; final weight scales with the quoted cut size |
Included Equipment
- Faux wood blind cut to quoted width and length
- Impact-resistant headrail with engineered bottom rail
- Color-matched valance
- Installation brackets and screws
- Hold-down brackets for outside mount
- Installation and care guide
Installation Notes
- Measure each opening width and height to the nearest 1/8 in. before quote submission.
- Inside mount requires 1 5/8 in. minimum depth; allow 2 7/8 in. to 3 7/8 in. for a fully recessed fit depending on valance choice.
- Outside mount requires at least 2 in. of flat mounting surface per side.
- The wider slat means a shallow window frame will not give a fully flush inside mount.
- Review the final cut dimensions and mount type during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty with online registration
- Replacement brackets, valance clips, wands, and tilt components are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
How do I order a custom width?
Add the blind to your quote list and include the window schedule with opening sizes to the nearest 1/8 in. and mount type in the quote note. Each blind is cut and confirmed during quote review.
What is the difference between standard and premium finishes?
Premium finishes add upgraded slat texture and colorfastness on the same platform. Both tiers share the cordless lift and dimensional program.
Why choose a 2 1/2 in. slat?
The wider slat gives a larger unobstructed view when open and fewer slat lines across the window, closer to the look of a plantation shutter.
Is this blind suitable for humid rooms?
Yes. PVC composite slats resist moisture and are commonly used in kitchens, baths, and garages.
Documents
- Type Faux Wood Blind
- SKU VS-WCV-FWB-25-CDLS-CW
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.