Vanguard Shade 2 in. Designer Routeless Faux Wood Blind, Custom Cut Width

SKU: VS-WCV-FWB-20-PREM-SNW
Color

Custom size optional, quoted per dimensions

Enter opening width and height to the nearest 1/8 in.; factory deductions applied per mount during quote review.

Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.

This specifier-ready summary covers a designer-grade 2 in. faux wood blind with cordless lift, wand tilt, routeless slats that remove cord route holes, a decorative headrail that closes the top light gap without needing a valance, and a bottom rail that seals the final gap when closed. Each blind is cut to the quoted width and length. Add the product to the quote list and include the window schedule in the quote note, with opening sizes measured to the nearest 1/8 in. and the mount type identified for each opening, and each unit is cut and confirmed during quote review before release.

Highlights

  • Routeless 2 in. slats remove route holes for tighter closure and stronger privacy
  • Decorative low-profile headrail blocks the top light gap, no valance required
  • Sealed bottom rail design closes the gap beneath the last slat
  • Cordless design removes accessible operating cords
  • Cut-to-width program from 7 in. to 96 in. covers sidelights through wide openings
  • Slat finishes rated through more than 2000 hours of UV exposure testing
  • Moisture-resistant, fire-retardant PVC composite slats
  • 34 painted and textured finishes across two finish tiers

Specification Table

Slat size 2 in., routeless
Material PVC composite, moisture resistant, fire retardant
Lift system Cordless lift
Tilt control Wand tilt
Cut width range 7 in. to 96 in., cut to 1/8 in.
Length range 24 in. to 96 in.
Inside mount deduction Approximately 3/8 in. total, applied at cut
Minimum inside mount depth 1 5/8 in., 2 11/16 in. fully recessed
Minimum outside mounting surface 1 3/4 in.
Headrail Decorative low-profile headrail, valance optional
Valance options 3 7/8 in. modern or 4 1/16 in. crown, cut to blind size
Light control Room darkening when closed
Warranty Limited lifetime warranty with online registration
Unit weight (nominal) Approximately 13.0 lb at the reference size; final weight scales with the quoted cut size

Included Equipment

  • Routeless faux wood blind cut to quoted width and length
  • Decorative low-profile headrail with top mounting brackets
  • Sealed-design bottom rail
  • Installation brackets and screws
  • Installation and care guide

Installation Notes

  • Measure each opening width and height to the nearest 1/8 in. before quote submission.
  • Inside mount requires 1 5/8 in. minimum depth; allow 2 11/16 in. for a fully recessed fit with the low-profile headrail.
  • Outside mount requires at least 1 3/4 in. of flat mounting surface; side mount brackets are available when top mounting is not possible.
  • Optional valances are cut to the ordered blind size during production.
  • Review the final cut dimensions, valance choice, and mount type during quote review before order release.

Warranty and Support

  • Published warranty coverage: limited lifetime warranty with online registration
  • Replacement brackets, valance clips, wands, and tilt components are supported through quote review
  • Final warranty registration and coverage documents are confirmed during quote review

Frequently Asked Questions

What does routeless mean?
The slats have no drilled cord route holes. Support cords run behind the slats, so closed slats show no pinholes of light and privacy is stronger.

Do I need a valance?
No. The decorative headrail is designed to be seen and blocks the top light gap on its own. Modern and crown valances remain available as options.

How do I order a custom width?
Add the blind to your quote list and include the window schedule with opening sizes to the nearest 1/8 in. and mount type in the quote note. Each blind is cut and confirmed during quote review.

Will the finishes fade in strong sun?
Slat finishes are rated through more than 2000 hours of UV exposure testing for colorfastness.

Documents

  • Type Faux Wood Blind
  • SKU VS-WCV-FWB-20-PREM-SNW

Download the available product documents below. If a document is not linked yet, use the SKU during quote review.

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.