Vanguard Shade Hold Down Bracket Set for Horizontal Blinds
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This service set includes two hold down brackets, two bottom rail pins, and mounting screws. The pins seat into the ends of the bottom rail and drop into the brackets mounted below, holding the blind snug against the surface. Add the set to your quote list and note the blind model or bottom rail type in the quote note so fit is confirmed during quote review.
Highlights
- Stops blind sway on doors, French doors, and tilt-in windows
- Two brackets, two pins, and screws in one set
- Stamped steel brackets with nylon bushings for quiet hold
- Fits Vanguard Shade horizontal blinds and common headrails
- Installs with a screwdriver in minutes
- Removable pins release the blind for cleaning
Specification Table
| Contents | 2 brackets, 2 pins, 4 screws |
| Material | Stamped steel, nylon bushings |
| Compatibility | Vanguard Shade horizontal blinds and common headrails |
| Function | Bottom rail hold down for doors and tilt-in windows |
| Installation | Screwdriver install, template included |
| Warranty | Limited manufacturer warranty |
| Unit weight (nominal) | Approximately 0.6 lb per unit as packaged |
Included Equipment
- 2 hold down brackets
- 2 bottom rail pins
- 4 mounting screws
- Placement template card
Installation Notes
- Lower the blind fully and mark bracket positions below each end of the bottom rail.
- Insert the pins into the bottom rail ends before mounting the brackets.
- Drive the screws into the door stile or sash; pre-drill on fiberglass or metal doors.
- Confirm the bottom rail end caps accept pins; note the blind model in the quote note for fit confirmation during quote review.
Warranty and Support
- Published warranty coverage: limited manufacturer warranty
- Replacement pins and screws are supported through quote review
- Final coverage documents are confirmed during quote review
Frequently Asked Questions
Will these fit my blinds?
The set fits Vanguard Shade horizontal blinds and common headrail bottom rails. Note your blind model in the quote note and fit is confirmed during quote review.
Do they work on metal doors?
Yes, with pre-drilling and appropriate screws for the door skin. The included screws suit wood and composite surfaces.
Can I still remove the blind for cleaning?
Yes. Lift the pins out of the brackets and the bottom rail swings free; the brackets stay mounted.
Documents
- Type Covering Accessory
- SKU VS-WCV-ACC-HDB
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.