Vanguard Shade Sheer Vertical Shade, Light Filtering, Custom Cut
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This specifier-ready product summary covers a sheer vertical shade with 3.5 in. fabric vanes behind a sheer knit facing, an aluminum traversing headrail, and wand control, cut to the quoted width and length. Add the shade to your quote list and include the window schedule with each opening measured to the nearest 1/8 in. and the mount type for each opening in the quote note. Include the stack direction, left, right, or split, so door access stays clear. Each unit is cut and confirmed during quote review before release.
Highlights
- Sheer facing softens the vertical vanes into a drapery-like face
- 3.5 in. fabric vanes rotate for view-through, filtered light, or privacy
- Wand control rotates and draws the vanes with no accessible cords or chains
- Vanes and sheer facing draw fully to one side for clear door access
- Light filtering weave keeps rooms bright while screening the view
- Custom cut program for sliding doors and wide windows
- Ceiling or wall mount with hardware included
Specification Table
| Vane size | 3.5 in. |
| Material | Woven polyester vanes behind a sheer knit facing |
| Control | Wand, rotates and traverses |
| Headrail | Aluminum traversing headrail with self-aligning glides |
| Cut width range | Custom cut, confirmed per opening at quote review |
| Length range | Custom cut, confirmed per opening at quote review |
| Mount | Ceiling or wall mount above the opening |
| Light control | Light filtering; sheer view-through with vanes open |
| Application | Sliding doors and wide windows |
| Warranty | Limited lifetime warranty with online registration |
| Unit weight (nominal) | Approximately 11.9 lb at the reference size; final weight scales with the quoted cut size |
Included Equipment
- Aluminum traversing headrail cut to quoted width
- 3.5 in. fabric vanes with sheer facing cut to quoted length
- Color-matched valance
- Wand control
- Mounting brackets and screws
- Installation and care guide
Installation Notes
- Measure the opening width and height to the nearest 1/8 in. before quote submission.
- For sliding doors, set the vane length to clear the floor by about 1/2 in.
- Confirm stack direction, left, right, or split, in the quote note so door access stays clear.
- The sheer facing should hang free of baseboard heaters, floor vents, and door hardware.
- Review the final cut dimensions and stack direction during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty with online registration
- Replacement brackets, wands, and glide components are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
How do I order a custom size?
Add the shade to your quote list and include the opening sizes to the nearest 1/8 in., the mount type, and the stack direction in the quote note. Each unit is cut and confirmed during quote review.
How is this different from a fabric vertical blind?
A fabric vertical blind shows its individual vanes. A sheer vertical shade adds a continuous sheer facing in front of the vanes, so the window reads as one soft drapery panel while the vanes still rotate for light control.
Is the wand control child-safe?
The wand rotates and traverses the vanes with no accessible cords or chains.
Can vanes be replaced later?
Yes. Vanes hang individually from glide stems and replacements are quoted through the same program.
Documents
- Type Sheer Vertical Shade
- SKU VS-WCV-VRT-SHR-WH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.