Vista Closet 15.75 in. D x 97 in. L White Melamine Closet Shelf
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
Each piece is 3/4 in. engineered wood faced with white melamine on both sides, cutting cleanly for site-built closets, linen towers, and garage storage. The 97 in. shelves run full closet widths in 11.75 in. and 15.75 in. depths; the drilled 96 in. shelf carries pin rows for adjustable installs; the 23.75 in. x 48 in. shelf covers deep storage; and the 48 in. x 96 in. panel supplies partition and carcass stock from the same finish family. Edges band or trim per the build.
Highlights
- 3/4 in. melamine-faced engineered wood, finished both sides
- Full-length 97 in. shelves in two depths
- Pre-drilled option for adjustable shelf pins
- Deep 23.75 in. shelf and 4 ft x 8 ft panel stock
- Cuts cleanly for site-built closets and casework
- Wipe-clean white surface needs no painting
Specification Table
| Type | Melamine shelf and panel stock |
| Thickness | 3/4 in. |
| Shelf sizes | 11.75 x 97, 15.75 x 97, 15.75 x 96 (drilled), 23.75 x 48 in. |
| Panel size | 48 in. x 96 in. |
| Material | Melamine over engineered wood |
| Finish | White, both faces |
| Drilled option | Pin rows for adjustable shelving |
| Workability | Cuts with standard saws; edge-band cut edges |
| Weights | 13 to 55 lb by size |
| Application | Closet building, linen towers, garage storage, casework |
| Warranty | Limited manufacturer-backed warranty, confirmed during quote review |
Size Run
| Size | Format | Weight |
|---|---|---|
| 15.75 in. x 97 in. | Shelf | 18 lb |
| 11.75 in. x 97 in. | Shelf | 13 lb |
| 15.75 in. x 96 in. | Drilled shelf | 18 lb |
| 23.75 in. x 48 in. | Deep shelf | 13 lb |
| 48 in. x 96 in. | Panel | 55 lb |
| 11.75 in. x 48 in. | Shelf | 7 lb |
| 15.75 in. x 48 in. | Shelf | 9 lb |
What Is Included
- One melamine shelf or panel in the selected size
- Mounting cleats and hardware are quoted per build
Installation and Assembly Notes
- Support shelves on cleats or standards every 32 in. of span to prevent sag.
- Cut with a fine-tooth blade and score the melamine face to avoid chip-out.
- Edge-band or trim cut edges for a finished look.
- Panels used vertically should anchor to framing at top and bottom.
Warranty and Support
- Limited manufacturer-backed warranty, confirmed during quote review
- Replacement stock is supported through the quote desk
Frequently Asked Questions
Can I cut these to size?
Yes. The stock cuts with standard saws; score the melamine face first and edge-band the cut for a finished look.
What is the drilled shelf for?
It carries pre-drilled pin rows so adjustable shelves can be built without a drilling jig.
Is hardware included?
No. Cleats, standards, and fasteners are quoted per build; describe your layout in the quote.
Documents
- Type Closet Organizer
- SKU VC-CLO-ORG-MEL-1697
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.